Rear shoulder belt:
|
|
| Give a sharp upward tug on either side of the front edge of the rear
seat's lower cushion. |
 |
| Remove single 10mm bolt from each outer corner of the lower backrest. |
 |
| Lift backrest upwards to release from brackets on either side of top
edge. |
 |
| Lift front edge of seatbelt cover on parcel shelf and remove |
 |
| Remove 17mm bolts from each rear seatbelt sash. |
 |
Remove speakers.
|
| Unclip panel by lifting up at front edge, and slide tabs out rear bulk
head. |
 |
| Feed seat belt through parcel shelf trim as you lift it out. |
|
| Remove bolt from inertia reel and remove belt. |
 |
|
|
Middle belt and all receptacles:
|
|
| Give a sharp upward tug on either side of the front edge of the rear
seat's lower cushion. |
|
| Remove 17mm bolts securing belt to floor. |
 |
|
|
Installation:
|
|
| Line up inertia reel so that tab is located in slot of reel
housing. |
|
Torques:
|
|
| Seatbelts to body : 48 Nm (35 ft lbs.) |
|
