| Give a sharp upward tug on either side of the front edge of the rear
seat's lower cushion. |
 |
| Remove single 10mm bolt from each outer corner of the lower backrest. |
 |
| Lift backrest upwards to release from brackets on either side of
top edge. |
 |
| Lift front edge of seatbelt cover on parcel shelf and remove |
 |
| Remove 17mm bolts from each rear seatbelt sash. |
 |
Remove speakers.
|
| Unclip panel by lifting up at front edge, and slide tabs out rear bulk
head. |
 |
| Feed seat belt through parcel shelf trim as you lift it out. |
|
Installation:
|
|
| Speaker openings are marked on rear of trim panel in cars without rear
speakers. |
|
| Ensure correct seating of backrest on brackets. |
|
| Lock seat belts in their holders if equipped, or place on top of seat
cushion. Push rear edge of seat cushion in as far as possible, then push front edge down
so that clips engage seat. |
 |
| Seat base has openings for metal clips mounted to floor (above). |
 |
