| Remove splash shield below engine. |
|
| Disconnect turn signals (green arrows), fog lights (red arrows) and
ambient temperature sensor (yellow arrow, left side of car). |
 |
 |
| Remove 10mm screw (green arrow) and 8mm screw (red arrow) from
the splash shield in front of the wheel well. |
 |
| Pry out side markers and disconnect wiring. Feed wires
back through bumper. |
 |
| Pry off bolt covers in bumper cover. |
 |
| Remove the 19mm nut below each cover. |
 |
| Slide bumper forward to remove, disengaging splash shields as
doing so. |
|
Installation:
|
|
| Sides of bumper have brackets that mate with slots on the body. |
 |
 |
| Slide bumper straight in, checking position of side brackets. |
 |
| Push inner fender sections into place behind bumper cover. |
|
