| 36 02 84 (893) |
Air loss from tires on aluminum wheels |
Clean corrosion from rims so that tire seals |
January 1985 |
| 36 03 84 (938) |
Bent alloy rims |
Increase in specified tire pressures with load from 26 psi to 29 psi in
attempt to prevent rim damage |
December 1984 |
| 36 04 84 (957) |
Wheel centering hub corrosion |
Use Plastilube P/N 81 22 9 407 103 to prevent corrosion between wheel and
hub |
May 1985 |
| 36 01 86 (1143) |
Snow tire application |
Lists appropriate snow tire sizes |
September 1988 |
| 36 03 86 (1303) |
General Tire Information |
Warns to use only specified tires on M cars |
December 1986 |
| 36 01 87 (1377) |
Wheel Mounting Procedure |
Check to make sure the brake rotor retaining screw is tight and flush or
below surface of rotor or wheel bolts could loosen |
July 1987 |
| 36 02 87 (1390) |
Clips for wheel balance weights |
Change to single style of clip for two piece wheel weights |
October 1987 |
| 36 03 87 (1426) |
Damage to wheels |
Discusses the possibility of wheel damage from driving on a flat. Shows
where to check for run-out |
July 1987 |
| 36 01 88 (1569) |
Tire mounting procedure |
Do not use Silicone spray to lubricate tire beads when installing |
January 1988 |
| 36 02 88 (1627) |
Balancing of wheel and tire assemblies |
Discusses balancing procedure to achieve accurate results |
June 1989 |
| 36 03 88 (1762) |
Paint finish on BMW light alloy wheels |
Suggests having wheels bead blasted before repainting to achieve the best
results |
November 1988 |
| 36 02 90 (3150) |
Snow tire application chart for 90-91 models |
Lists appropriate snow tire sizes |
November 1990 |
| 36 02 92 (3512) |
Wheel fastening bolts |
New style has hollow head, is 9 grams lighter than old style, will cause
imbalance if mixed |
February 1992 |
