| 31 04 83 (743) |
Special lubricant for pressing rubber mounts onto front control arms E30 |
Use only lubricant P/N 81 22 9 407 284 |
May 1983 |
| 31 06 83 (789) |
Working on spring struts, shocks and springs |
Warns on correct procedure of strut work |
August 1984 |
| 31 03 85 (1087) |
Rubber mounts and bushings |
Always replace as pairs |
August 1985 |
| 31 01 86 (1138) |
Link between Stabilizer bar and control arm |
Re-torque link nuts at stabilizer bar to 40 -47 Nm (29-34 ft lbs.) to cure
clunking at bumps |
January 1986 |
| 31 02 86 (1207) |
Noise from front suspension |
Clean paint from tapered ball joint seats in cross member. |
May 1986 |
| 31 03 86 (1259) |
Front wheel bearing changes from 5/86 |
New style dust caps on wheel bearings, do not reuse dust caps. New style
of grease to prevent condensation forming inside bearing |
October 1986 |
| 31 01 87 (1356) |
Blocking of vehicle springs during shipment |
Rubber spacers in springs for shipping, make sure they are removed during
pre delivery inspection |
October 1987 |
| 31 03 87 (1513) |
Front Axle Final Drive 325iX |
Fill differential with new oil slowly, allow 20 to 30 seconds before
checking and considering full |
November 1987 |
