Back Index Up Next

 

Multi-Function clock, remove and install

Using a small screw driver or pick, pull face plate from unit. 620015.jpg (14877 bytes)
Squeeze tabs at top and bottom of unit and pull out of housing.

Lift up on black lever beside wiring connector do disconnect unit.

 620016.jpg (14869 bytes)
Change display illumination bulb (red arrow) and button back lighting bulb (green arrow). 620017.jpg (19174 bytes)

Installation
Ensure wiring connector is fully seated and lever is locked down.
Push unit into dash until tabs lock into place, refit face plate.
 

Back Index Up Next
E30 M3 Repair Manual V2.7.  Copyright ©1999-2001 Koala Motorsport & Brett Anderson