Orange side markers are for front use only, red for rear use
only.
One end of the light has a small slot in it. Insert the tip of a
screwdriver in this slot and gently pry out. When edge of light is out of bumper cover,
slide light out.
Disconnect socket by turning ¼ turn. Bulb pulls straight out of
socket.
Installation:
These lights are known to crack along the top of the bulb area, this
allows water to enter the light, corroding the bulb holder and wiring connector.
Before
installation of the light, smear some black or clear silicone sealer over the cracked
area.
