Remove headliner from sunroof by opening roof approximately 5 cm (2")
and pulling down on forward edge of liner.
Move roof to closed or vent position and slide headliner back into roof.
Do not push head liner so far back as to not be able to retrieve it.
CAUTION: Do not operate roof in backwards motion with headliner disconnected. Damage
to the head liner will result and it may also be pushed back into the roof beyond reach.
Remove the six Torx bolts (three on each side of roof)
Installation
Ensure roof mechanism is in closed position.
Place roof in position and install all 6 bolts loosely.
Install a 4mm Allen key in each side side position so that it is locked into grove in
slide (green arrow) and enters hole (yellow arrow).
Sunroof lid has been removed for photographic clarity.
Set roof at desired position and tighten bolts.
Remove 4mm Allen key and pull headliner forward. Open
roof approximately 5 cm (2") and align clips with holes in roof. Press clips
into holes firmly.
