Remove screw from each lower corner
of backrest cover
Pull knobs off release handles by inserting a small screw driver between
the knob and the plastic base. Long handle knob on outside of seat shown.
Shorter knob on inside edge of passenger seat is removed with the same method. Some
force is required.
Remove handle trim by prying on lower end. Lower end is secured by a
push pin, upper end is secured by a hook, you must pull the lower end away from seat, then
pull the trim downwards to release.
Passenger seat: Remove screw
from inner lever and remove.
Pull seat back cover away from base of seat back and up to
release from clips at top of seat back. Pull inboard side away from seat back and remove
over handle on outboard side of seat by turning seatback cover as you remove it.
Installation:
Hooks on back rest cover must engage frame.
Screws for back rest cover must have load spreading washers fitted.
Lever for inboard side of passenger seat must be inserted into slot in
mechanism before installing screw.
