| Press center pins out of rivets on plastic cover at rear of trunk opening. |
 |
| Remove trim from rear of trunk. |
|
| Inside trunk in center of rear panel are three 10mm bolts. One is behind a
plastic plug. Remove plug and the two bolts arrowed. Slide out lock cylinder / push
button. |
 |
| To remove latch from inside trunk, remove the third 10mm bolt, disconnect
the actuator rod (red arrow above) if central locking is fitted and slide latch assembly
out to the left. |
 |
| To remove lock cylinder from assembly, remove circlip in rear
and push cylinder out of the back of the handle. |
