| Hold water pump pulley (green arrow) with BMW special tool 11
5 030, or with a large set of "water pump" pliers. |
 |
| Remove fan (yellow arrow above) with BMW special tool 11 5 040
or similar slim 32mm wrench. |
| An alternative to using pliers is to install the wrench and
strike wrench sharply with a hammer in a clockwise direction. |
CAUTION: Left hand thread, turn wrench as if to tighten a regular bolt, to remove the fan.
|
Lift fan out and remove four 10mm regular, or four 5mm Allen
bolts, from rear of fan.
|
|
Torques :
|
|
|
| Fan to clutch |
: |
9 ± 1 Nm ( 6.5 ± 0.5 ft lbs.) |
| Water pump pulley |
: |
9 ± 1 Nm ( 6.5 ± 0.5 ft lbs.) |
| Fan clutch to water pump |
: |
40 + 10 Nm (29 + 7 ft lbs.) (30Nm if using BMW special tool 11
5 040) |
|
|
|
|
